SQUARE PORTABLE FIRE PIT
Included in this kit
1- Fire pit kit
Tools and equipment:
1- You may want to use some leather gloves it is personal preference
Safety:
- Please use common sense with anything fire related!!!
- Always have a water source such as a garden hose or 5 gallon bucket of water ready to put your fire out if it ever gets out of control
- Please know fire is unpredictable at times be aware of your surroundings as to not catch them on fire, watch for embers floating in the air to not catch local area on fire
- Keep fires contained within the fire pit no outside of leaned against or anything like that
- Do not touch fire pit within several hours of putting fire out or be ware it may stay hot for a while. Due to way metal reacts it is not recommended to dump a lot of water on the fire pit as it can warp the metal some (unless your fire is out of control) it is best to let it die down naturally as you are getting ready to end your fire just plan ahead and stop putting wood in it to let it die naturally.
- Stay clear of the fire except when putting wood in it and keep fire pit away from any buildings, shrubs, trees and other flammable type things as to not catch anything else on fire
- Keep your wood pile a good distance from the fire pit to not risk catching your wood pile on fire
- Recommended to check with local regulations on fire usage when you are traveling or camping
Installation: assembly is same as pit shown in pictures but pictures may vary
1.The 2 sides are the same and other 2 sides are the same they kind of stagger when you put the sides together. They slide together as seen in picture here.
2.Once you have all 4 sides put together, stick the floor of the fire pit in the nubs on the 4 sides will line up with the holes in the sides and just drop into place as seen
3.If purchase the fire pit top then you can just set It on the top and your ready to go
US METAL WORKS
541-224-3937
WWW.US-METALWORKS.COM
Painting Instructions
- Art work and other materials including fire pits…. Sand material lightly, then make sure the surface is clean of dust and debris (can use liquor with a rag or some sort of cleaner like that). It is best to lightly do a coat of spray paint first let it become a little tacky then do a couple more little heavier coats and let dry. For best results it is recommended to paint products around 70 degrees or in a warm environment.
- For Fire pits you may try to use a high temp barbeque paint from your local hardware store. There is no guarantee it will hold up over the whole fire pit as the heat may be too much for the fire inside. Or just let it rust naturally and get a natural character to your fire pit.
Misc. Information
Please check us out at www.us-metalworks.com. U.S. Metal Works website is currently still under construction. We offer many products from custom made, to metal art, custom brackets, and off-road parts. We do offer many services so if you have any questions or would like something custom made please call our number on the business card or 541-224-3937.
Also we offer many off-road services and parts. We offer many different brands of parts, lift kits, about anything in performance or off-road. We can beat many prices of our competitors or online prices just give us a call. 541-224-3937
TELL A FRIEND
THANKS FOR YOUR ORDER
