Rocking Wildlife Target Assembly
Included in this kit
1- Animal target kit (includes animal center section, 2 outside paddles for rocking, and bolt kit)
Tools and equipment:
1- eye protection glasses or face shield, hearing protection, and suggested leather gloves and anything else for safety
2- 9/16 end wrench and 9/16 socket on ratchet, electric impact or can use a 9/16 gear wrench
Installation:
1- Lightly sand 1st if you desire to paint it and clean the dust off
2- Paint and let fully dry before working with
3- Put the 2 padles down from top and slide over the ends of the animal center section
4- Install the 4 bolts from the outside in with the washer going on the outside with the bolt head and install the nuts on the backside to bolt together.
5- Tighten the bolts and nuts securely and they should always remain tight as they are nylock bolts.
6- Setup target and have fun making sure the surrounding area is safe secure and no people in range of fire.
Never shoot closer than 50 yards with a rifle, or 10 with a pistol
Recommended minimum 100 yards for most rifles
Keep Bullet speed 3000 fps or below at target
Always use hearing and eye protection with all targets, this includes spectators
Never use green tip or armor piercing rounds
Always use a safe back stop for all targets in case of missed targets
Know your surroundings for all safety measures!!!
US METAL WORKS
541-224-3937
WWW.US-METALWORKS.COM
Painting Instructions
- Gun Targets may or may not be painted based upon customer’s preference, as the target is shot it will take off paint anyways. If you do choose to paint Targets it is recommended that you lightly sand product before painting as it will help paint stick to product. It is best to lightly do a coat of spray paint first let it become a little tacky then do a couple more little heavier coats and let dry. For best results it is recommended to paint products around 70 degrees or in a warm environment.
- Art work and other materials…. Sand material lightly, then make sure the surface is clean of dust and debris (can use liquor with a rag or some sort of cleaner like that). It is best to lightly do a coat of spray paint first let it become a little tacky then do a couple more little heavier coats and let dry. For best results it is recommended to paint products around 70 degrees or in a warm environment.
Misc. Information
Please check us out at www.us-metalworks.com. U.S. Metal Works website is currently still under construction. We offer many products from custom made, to metal art, custom brackets, and off-road parts. We do offer many services so if you have any questions or would like something custom made please call our number on the business card or 541-224-3937.
Also we offer many off-road services and parts. We offer many different brands of parts, lift kits, about anything in performance or off-road. We can beat many prices of our competitors or online prices just give us a call. 541-224-3937
TELL A FRIEND
THANKS FOR YOUR ORDER
