3/8 AR500 T Post Hanger
Included in this kit
- 3/8 AR500 T post Hangers (depending the number you ordered)
Tools and equipment:
1- eye protection glasses or face shield, hearing protection
2- Leather gloves for protection
3- Optional Grinder with grinding wheel, or sanding wheel
4- Optional Drill or grinder to make hole in your target slightly larger
Installation:
- The 3/8 T post hangers require a .6 to .65 inch hole for the steel target which is around a 5/8 inch hole as stated on the listings. If your targets have a pretty standard ½ (.50 inch) hole it may be necessary to either drill/grind the hole out on your target a little or else use a small grinder or sanding wheel to sand off the sharp edges of the hook portion of the hanger till it will fit and slide good inside of the hole on your target
Never shoot closer than 50 yards with a rifle, or 10 with a pistol
Recommended minimum 100 yards for most rifles
Keep Bullet speed 3000 fps or below at target
Always use hearing and eye protection with all targets, this includes spectators
Never use green tip or armor piercing rounds
Always use a safe back stop for all targets in case of missed targets
Know your surroundings for all safety measures!!!
US METAL WORKS
541-224-3937
WWW.US-METALWORKS.COM
Painting Instructions
- Gun Targets may or may not be painted based upon customer’s preference, as the target is shot it will take off paint anyways. If you do choose to paint Targets it is recommended that you lightly sand product before painting as it will help paint stick to product. It is best to lightly do a coat of spray paint first let it become a little tacky then do a couple more little heavier coats and let dry. For best results it is recommended to paint products around 70 degrees or in a warm environment.
- Art work and other materials…. Sand material lightly, then make sure the surface is clean of dust and debris (can use liquor with a rag or some sort of cleaner like that). It is best to lightly do a coat of spray paint first let it become a little tacky then do a couple more little heavier coats and let dry. For best results it is recommended to paint products around 70 degrees or in a warm environment.
Misc. Information
Please check us out at www.us-metalworks.com. U.S. Metal Works website is currently still under construction. We offer many products from custom made, to metal art, custom brackets, and off-road parts. We do offer many services so if you have any questions or would like something custom made please call our number on the business card or 541-224-3937.
Also we offer many off-road services and parts. We offer many different brands of parts, lift kits, about anything in performance or off-road. We can beat many prices of our competitors or online prices just give us a call. 541-224-3937 or check us out at www.us-metalworks.com.
TELL A FRIEND
THANKS FOR YOUR ORDER
