2x4 Collapsible Vertical Stand Kit

2 X 4 Collapsible Vertical Stand Kit

Included in this kit

1-      Stand Kit (3 base plates, 1 hanger attachment)

2-      (Optional) if ordered with stand kit, torsos or gongs for hanging target

Tools and equipment:

1-      eye protection glasses or face shield, hearing protection, and suggested leather gloves and anything else for safety

Installation:

1-      Lightly sand 1^st if you desire to paint it and clean the dust off

2-      Paint and let fully dry before working with

3-      Take the 2 side plates (saying US METAL, AND WORKS), then slide them over the center plate (this is the base plate for the 2x4 to hang the target). The center piece is press broke with angles on the side this is to keep the target feet from collapsing over or sliding off the ends while being shot.

4-      Cut a 2x4 (not supplied) to your desired height and insert it into the base NOW WITH ADJUSTER BASE

5-      Adjust the bolt in the base to tighten up the slack in the 2x4 and base (This is normal do not worry the slightly loose fit is there as 2x4’s can swell or shrink almost a whole ¼ inch based upon how wet they are or left out in the rain or sun) (Do not overtighten or you may strip the threads in the base….. just snug so the 2x4 is stable does not have to be tight.)

6-      Next stick the top (the part with the hook) onto the top of the 2x4

7-      Hang your desired target and enjoy

8-      PLEASE READ SAEFTY AND SPEC BROCHURE BEFOR USING

Never shoot closer than 50 yards with a rifle, or 10 with a pistol

Recommended minimum 100 yards for most rifles

Keep Bullet speed 3000 fps or below at target

Always use hearing and eye protection with all targets, this includes spectators

Never use green tip or armor piercing rounds

Always use a safe back stop for all targets in case of missed targets

Know your surroundings for all safety measures!!!

US METAL WORKS

541-224-3937

WWW.US-METALWORKS.COM

Painting Instructions

1. Gun Targets may or may not be painted based upon customer’s preference, as the target is shot it will take off paint anyways. If you do choose to paint Targets it is recommended that you lightly sand product before painting as it will help paint stick to product. It is best to lightly do a coat of spray paint first let it become a little tacky then do a couple more little heavier coats and let dry. For best results it is recommended to paint products around 70 degrees or in a warm environment.
2. Art work and other materials…. Sand material lightly, then make sure the surface is clean of dust and debris (can use liquor with a rag or some sort of cleaner like that). It is best to lightly do a coat of spray paint first let it become a little tacky then do a couple more little heavier coats and let dry. For best results it is recommended to paint products around 70 degrees or in a warm environment.

Misc. Information

Please check us out at www.us-metalworks.com. U.S. Metal Works website is currently still under construction. We offer many products from custom made, to metal art, custom brackets, and off-road parts. We do offer many services so if you have any questions or would like something custom made please call our number on the business card or 541-224-3937.

Also we offer many off-road services and parts. We offer many different brands of parts, lift kits, about anything in performance or off-road. We can beat many prices of our competitors or online prices just give us a call. 541-224-3937

TELL A FRIEND

THANKS FOR YOUR ORDER